Stamps:
Frightening
Feline, Single Stamp #128105 $8.95 wood mount only, pg 26 Holiday Catalog
Paper:
Howlstooth and
Scaringbone Designer Series Paper #126906 $10.95/12 sheets, pg 24 Holiday
CatalogBasic Black Cardstock 8.5”x11” #121045 $6.95/24 sheets, pg 156
Tangerine Tango Cardstock 8.5”x11” #111349 $6.95/24 sheets, pg 153
Whisper White Cardstock 8.5”x11” #100730 $8.50/40 sheets, pg 156
Ink:
VersaMark #102283 $7.50 pg 159
Tools:
Paper Snips #103579
$9.95 pg 180Simply Scored #122334 $29.95, pg 181
Paper cutter – coming soon!
Accessories & Adhesives:
SNAIL Adhesive #104332 $6.95/472” (40’), pg 177
Stampin Dimensionals #104430 $3.95/300pcs, pg 177
Glue Dots #103683 $4.95/400dots, pg 177
Paper Piercer #126189 $3.95 pg 181
Embossing Buddy #103083 $5.95 pg 159
Heat Tool #129053 $29.95 pg 159
Black Stampin’ Emboss Powder #109133 $4.75/0.5oz, pg 159
Tangerine Tango Stampin’ Emboss Powder #123106 $4.75/0.5oz, pg 159
Brights Designer Buttons #119747 $8.95/72 buttons, pg 176
3/8” Basic Glimmer Brads #121003 $4.95/40 brads, pg 174
Linen Thread #104199 $4.50/15yds, pg 173
1. First cut
your Basic Black and Tangerine Tango 8 ½” x 11” cardstock to 8 ½” x 5 ½” Score
and fold in half, making the front of the card 4 ¼” x 5 ½”.
2. I wanted ¼” of the base cardstock to show through all around my pattern
layer, so subtract ½” from the both front measurements; 4 ¼” x 5 ½” goes down
to 3 ¾” x 5” for the pattern piece.
3. Cut strips into ¾” x 5” for the next layer. I used 6 on my three cards, but you can cut as many as you like for however many layouts you want to use. If you want the banners a little longer you can cut the pattern layer smaller, or the cut the banner strip to hang over the edge of the card. Just make sure it will fit into an envelope without having to fold in the banner.
3. Cut strips into ¾” x 5” for the next layer. I used 6 on my three cards, but you can cut as many as you like for however many layouts you want to use. If you want the banners a little longer you can cut the pattern layer smaller, or the cut the banner strip to hang over the edge of the card. Just make sure it will fit into an envelope without having to fold in the banner.
4. Cut banner triangles into the ends of the strips. For my card using four strips I lined up the chevron pattern how it was before it was cut and alternated which end I cut, this makes the eye move like crazy.
5. Adhere the bottom pattern layer with snail, adhere the banner strips with snail.
6. Cut your Whisper White cardstock to 3” x 3” squares, rub with the Embossing Buddy anti static bag.
7. Using a large piece of scrap paper underneath for each color Stampin’ Emboss powder used, stamp the Frightening Feline image in Versamark. Stamp directly up and down to prevent the whiskers from smearing.
8. Immediately
pour the desired color of embossing powder over the image. Tap the back with
your nail to remove any excess powder. After powdering, dump the remaining
powder back into the container by cupping the scrap paper like a taco; tap the
end to move it along.
9. Once you have stamped and powdered all the cats you’ll need, heat emboss with the Heat Tool. Use tweezers to hold the image at the corners. Watch carefully so you don’t overheat and curl the edges.
9. Once you have stamped and powdered all the cats you’ll need, heat emboss with the Heat Tool. Use tweezers to hold the image at the corners. Watch carefully so you don’t overheat and curl the edges.
10. Add bling! I used Pumpkin Pie buttons from the Brights Designer Buttons with Linen Thread and Glue Dots, a couple Basic Glimmer Brads with my trusty Paper Piercer, and cut out two cats on one card using my super sharp Paper Snips and popped all of the cats up on Stampin Dimensionals.
No comments:
Post a Comment